M-6007-M50DAUTO Ford Racing Mustang 5.0L Coyote Gen 4 480hp Automatic Transmission Crate Engine

Chevrolet Performance Parts, GM Crate Engines and GM Crate Motors

M-6007-M50DAUTO Ford Racing Mustang 5.0L Coyote Gen 4 480hp Automatic Transmission Crate Engine (No Cancel/Returns)

Ford Performance Parts is pleased to announce the latest 5.0L Coyote all-aluminum crate engine from the 2024 Mustang GT. This modern 5.0L 32-valve DOHC V-8 uses advanced features such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 horsepower and 415 lb.-ft. of torque (with premium fuel).

The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and optimized oil drainback and windage control to improve high-rpm performance.

480 Horsepower @ 7,150 rpm
415 lb.-ft. of Torque @ 4,900 rpm
12.0:1 Compression ratio
Bore 93 mm x Stroke 92.7 mm
Hypereutectic aluminum pistons
Sintered steel connecting rods as used on BOSS 302 Mustang
Forged steel crankshaft
Aluminum block which features plasma transferred wire arc spray weld liner coating
Longer, 12 mm head bolts for higher clamp load
9.5 qt capacity steel oil pan
Tuned composite intake manifold provides efficient air delivery and weight savings
Twin 80 mm single bore "drive by wire", electronic throttle bodies with variable runner control
High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
Includes engine harness and production flexplate. For engine equipped with manual flyhwheel, see M-6007-M50D
Engine mount bosses and bell housing mount pattern common to 5.0L modular engines
Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
Vehicle harness and PCM not included
Use Ford Performance M-6017-M50DA Control Pack which includes wiring, PCM and installation kit, designed for project car installation
Does not include alternator, for alternator kit see M-8600-M50BALT or M-8600-M50ALTA
5.0L Coyote air conditioning kit available, see M-8600-M50AC
5.0L Mustang motor mount kit available, see M-6038-M50
5.0L Mustang engine cover kit available, see M-9680-M50D
Photo and specs may vary
Engine weight: 453 lbs. without front accessory drive components

***Note: driver side exhaust flange utilzes the 5.2L pattern***