Aluminum V8 Block for Big displacements Engines 24502495 - Crate Engine Depot
|
|
|
|
Top > Engine Components > Small Blocks & Components > Partial Engines - Bare Blocks - Components > Aluminum V8 Block for Big displacements Engines 24502495 |
 |
Aluminum V8 Block for Big displacements Engines 24502495
SKU: 24502495
RETAIL: $6,549.60
YOUR PRICE: $5,894.64
|
|
Aluminum V8 Block for Big displacements Engines 24502495 Description
|
|
This tall deck (9.525") aluminum block can be bored to (4.160") and stroke to (4.125" with minor modification and 4.250" stroke with major modifications). The deck height is 9.525" with a 1.125" deck surface that can be machined as low as 9.000". The bores start at 4.119" and can be bored to 4.160" with a 2.65" (400-type) main bearing size and the camshaft is raised 0.391" from production location. Pan rails are spread 0.400" per side for clearance of connecting rods. The main caps are four-bolt design of 8620 steel with the three inner middle caps having ball-end outer studs that are angled outward at 20º to anchor the caps to the strongest part of the block. The four-bolt front and rear caps have straight outer bolts for oil pan clearance. The main cap hardware includes premium bolts, centerless ground studs and 12-point nuts. The rear main uses a 400-type two-piece rear seal (Fel-Pro P/N 2909). This block uses a priority main oiling system and is a dry sump design with no provisions for an internal oil pump. The oil filter pad is eliminated so the starter can be mounted on either side and the fuel pump boss is also removed. Technical Notes: Special oil pan, camshaft, and timing chain are required for this block. Use cam bearing kit P/N 12370843.
|
|
|
|
|
