19328743 LS9 CNC-Ported Cylinder Head

Shop By Category

Other products by GM Parts
Item #: 19328743
Reg. Price: $1,007.87
Our Price: $886.93
Quantity:
 

Description 

19328743 LS9 CNC-Ported Cylinder Head
Priced per each

Chevrolet Performance?s all-new, limited production LS9 CNC-ported cylinder head assembly P/N 19328743 represents a new benchmark in factory engineering high performance, with the strength and durability of the production LS9 cylinder head casting and the airflow enhancements of precision CNC porting. The result is a head that flows about 10% more than the production casting, while delivering the greater strength built into the LS9 casting.

Individually packaged and ready to bolt on.
This is a limited production part.

ADDITIONAL INFORMATION

• Special A356T6 aluminum Roto-cast head casting for greater strength. The mold is rotated during production to create a more solid casting that virtually eliminates porosity
• Reinforced webbing and thicker deck (for minimal distortion) makes it an excellent choice for supercharged and turbocharged engine combinations
• CNC-ported for approximately 10 percent greater airflow (intake side) than the regular-production cylinder head (similar to LS3 CNC-ported head P/N 88958758)
• As-cast 66.5cc combustion chamber volume
• Fully assembled with production LS9 2.165" (55mm) titanium intake valves and sodium-filled 1.590" (40mm) exhaust valves; and beehive-type valve springs
• Valve springs rated for .570-inch" max lift
• Can be used on LS engines with at least a 4.000" bore using standard 11mm head bolts in place of the LS9’s 12mm head bolts


Read on:

Exceptional airflow characteristics are what give the LS engine family its tremendous performance capability, enabling power levels for street engines that were virtually unattainable in previous-generation Small-Block engines.
Chevrolet Performance’s all-new LS9 CNC-ported cylinder head assembly – P/N 19328743 – represents a new benchmark in factory-engineering highperformance, with the strength and durability of the production LS9 cylinder head casting and the airflow enhancements of precision CNC porting. The result is a head that flows about 10 percent more than the production casting, while delivering the greater strength built into the LS9 casting.

The LS9, of course, was the supercharged engine in the C6 Corvette ZR1. To support the higher combustion pressure and temperature that come with forced induction, the heads were produced with a unique Roto-cast method in super-strong A356T6 aluminum alloy. With the Roto-cast method, the mold rotates to more evenly distribute the molten alloy, creating a denser head casting that virtually eliminates porosity. And compared to the similar LS3 head, the LS9 features reinforced webbing and a thicker deck for greater rigidity and minimal distortion.

The A356T6 alloy also manages the higher heat of a forced engine more effectively. In short, Chevrolet Performance’s LS9 CNC-ported head assembly is the ultimate production-based solution for supercharged and turbocharged combinations. Each comes fully assembled with production, lightweight titanium intake valves and sodium-filled exhaust valves, as well as strong beehive-type valve springs that can handle up to .570" lift. Importantly, they can be installed on any LS engine with at least a 4.000" bore using standard 11mm head bolts.

Our new LS9 CNC-ported head represents the pinnacle of Chevrolet Performance’s tiered approached to affordable, factory-engineered cylinder head options for LS engine builders. It starts with our productionbased head assemblies such as the LS3 head (P/N 12629063), which deliver great performance out of the box and make excellent retro-fit solutions for many engine combinations. Our CNC-ported LS3 head (P/N 88958758) takes production performance higher with enhanced airflow capability that not only delivers a performance advantage singularly, but optimizes the gains offered with additional modifications such as a "hotter" camshaft.

The LS9 CNC-ported head is the ultimate choice when your production engine-based performance needs to include a blower or turbo.


Head P/N 19328743 assembled with the following:

12605524 Titanium Intake Valve (2.165")
12596508 Valve Spring Caps
12605525 Sodium Filled Exhaust Valve (1.590")

10166345 Valve Stem Keys
12625033 LS9 Beehive Valve Spring
12582717 Valve Seal-Intake (Integral Seal & Spring Seat)

12582718 Valve Seal-Exhaust (Integral Seal & Spring Seat)
12596509 Rocker Arm Wear Pads (Intake valve only)

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

LS3 Cylinder Head 88958758
List: $859.89
Price: $756.72

Product Accessories for LS9 CNC-Ported Cylinder Head 19328743