19300955 Cylinder Head (Aluminum Fast Burn)
  • Cylinder Head (Aluminum Fast Burn) 19300955

click on thumbnail to zoom
Other products by GM Performance Parts
Item #: 19300955
Reg. Price: $1,187.16
Our Price: $1,095.16


Cancer and Reproductive Harm



19300955 Replaces 12464298 Cylinder Head (Aluminum Fast Burn)

Chevrolet Performance’s Fast Burn 23-degree cylinder heads deliver maximum performance for Small-Block engines. A new head casting – distinguished by new Chevy bowtie logos at each end – and new valvetrain with high-rpm, LS-style beehivetype valve springs stretches the performance range of the heads to enable greater power – including a 25-hp increase in our ZZ383 crate engine! Fast Burn technology delivers more horsepower by increasing cylinder pressures, which maximizes the air/fuel mixture’s combustion. The 62cc combustion chamber is designed for used with flat-top pistons. The CNCmachined Fast Burn heads require no additional porting for optimal performance, so all you need to do is bolt them onto your Small-Block and go! They can be used on any Small-Block engine with at least 4.000-inch bores and the standard-flow coolant system.
Not for use on Gen II 1992-96 LT1/LT4 engines with reverse-flow cooling system.

Fast Burn Aluminum Cylinder Head Assembly

• CNC-machined aluminum performance cylinder head
• Completely assembled with 2.000"/1.550" valves
• 210cc intake port, roof raised .240"
• 78cc D-shaped exhaust ports, raised .200" – requires Fel-Pro® exhaust gasket P/N 1470 (may require minor trimming)
• 62cc combustion chamber, .400" deck (can be milled to .060")
• No heat riser
• Angled spark plugs (5/8" hex, 3/4" reach, tapered plugs)
• 1.48" valve spring seat diameter
• Use head gaskets with stainless steel fire rings
• Raised, machined rocker rails
• .530" maximum valve lift (without modifications)
• Screw-in studs (3/8" top, 7/16" bottom)
• New “time-serts” prevents oil migration through rocker studs
• Dual bolt patterns for perimeter-bolt and center-bolt valve covers
• Dual bolt patterns for Vortec and early-model intake manifolds
• Use bare head P/N 19300956
• Use production intake gasket P/N 19301685

This head is assembled with the following components:
12555331 Intake valves (4)
19301708 Valve spring retainers (8)

12551313 Exhaust valves (4)
19301709 Valve stem key (16)

12625033 Valve springs (8)
12552126 Valve rocker arm studs (8)

19301707 Valve spring seats (8)
10168519 Valve guides (8)

10212810 Valve stem seals (8)
12346004 Valve rocker arm stud sealer




Be the first to submit a review on this product!
Review and Rate this Item

Product Accessories for Cylinder Head (Aluminum Fast Burn) 19300955


Pin It

Email A Friend

Send your friend a link to this product.