19431953 Chevrolet Performance Crate Engine

Shop By Category

Other products by Chevrolet Performance
Item #: 19431953
Reg. Price: $11,495.90
Our Price: $9,656.54
Quantity:
 

 

Cancer and Reproductive Harm

https://www.p65warnings.ca.gov

Description 

19431953 Chevrolet Performance Crate Engine Asm Wet Sump Replaces 19355405, 19418843
455 HP LT1 Performance Engine W/Digital Sensor


Chevrolet Performance is proud to offer the all-new LT1 crate engine. Introduced on the seventh-generation Corvette Stingray, the LT1 6.2L opened the next chapter in the long, historic legacy of the Small-Block engine - and gives your project vehicle a high-tech heart transplant with an unprecedented balance of performance and efficiency!

The LT1 is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing to support an advanced combustion system.

The Chevrolet Performance LT1 crate engine is rated at 455 horsepower and 455 lb.-ft. of torque; and it is offered with a wet-sump or dry-sump oiling system. A controller specially designed for retro-fit application using an automatic transmission is available.

Specifications:
Power: 455 HP @ 6000 RPM, 455 ft. lbs. of torque @ 4600 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.065” x 3.622”
Compression Ratio: 11.5:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: 8-bolt Forged Steel
Connecting Rods: Forged Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Billet Steel Hydraulic Roller Tappet
Cam Lift: .561” Intake / .531” exhaust
Cam Duration @ .050”: 242 deg. Intake / 244 deg. Exhaust
Lobe Separation: N/A
Cylinder Heads: Aluminum Rectangular Port, Direct Injected
Combustion Chamber: 59cc
Valves: 2.130” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.81:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600

Engine Includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Oil pump, pick-up and wet sump oil pan
• Exhaust Manifolds
• Intake, Injectors and Throttle Body
• High Pressure Fuel Pump (installed)
• 14” Auto Trans Flexplate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Oil Filter
• Passenger Side RH Oil Dipstick and Tube


TECH SPECS

Part Numbers:

19431953 (wet sump) for use with the Connect and Cruise 8-speed Automatic package

Engine Type:
Direct Injection spark ignition
Gen V Small-Block V-8
Displacement (cu in): 376 cu in 6.2L
Bore x Stroke (in): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12619171): Cast-aluminum with 6-bolt nodular iron main bearing caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered metal
Pistons: Hypereutectic aluminum
Camshaft Type (P/N 12629512): Billet steel roller
Valve Lift (in): 0.561 intake / 0.531 exhaust
Camshaft Duration (@0.050 in): 242° intake / 244° exhaust
Cylinder Heads (P/N 12620544): Aluminum, rectangular port D/I
Valve Size (in): 2.130 intake / 1.590 exhaust
Compression ratio: 11.5:1
Rocker Arms (P/N 12619829 int): Investment-cast, roller trunnion
Rocker Arms (P/N 12619829 exh): Investment-cast, roller trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended RPM: 6,600
Reluctor Wheel: 58x
Balanced: Internal


INSTALLATION NOTES

 

• Engines shipped with high-pressure direct-injection fuel pump installed
• Dry Sump Engine, P/N 19329997, requires production or after-market oil lines and external oil tank (not included)
• Dry Sump Engine, P/N 19329997, comes with a Corvette oil pan. Use oil hose adaptors P/N 25534412 to adapt AN-12 fittings
• Assembly does not include any electronics
• Use LT1 Controller Kit, P/N 19303137 for engine operation.
Kit includes electronic throttle pedal, which is required for throttle input to the ECU
• Intended for pre-1976 street vehicles, or any off-road vehicle
• Not intended for marine applications
• Front-End Accessory Drive Kit, P/N 19329990, can be ordered separately
• For LT1 P/N 19355405 use P/N 12678595 FEAD w/o air and P/N 12678596 A/C add-on kit
• 8-bolt crankshaft flange
• Shipped with 14" flexplate

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Product Accessories for Chevrolet Performance LT1 Wet Crate Engine 19431953

Other Items In This Category

Share







Pin It

Email A Friend

Send your friend a link to this product.